Safety Precautions For Using Medical Beds

Before using an electric medical bed, first check if the power cord is plugged in properly. Is the controller cable reliable. The linear drive power supply and power cord of the controller must rotate between the elevator and the upper and lower bed frames.
Before using an electric medical bed, first check if the power cord is plugged in properly. Is the controller cable reliable.
2. The linear drive power supply and power cord of the controller must rotate between the elevator and the upper and lower bed frames. The light was on and the power was cut off, causing a personal equipment accident.
3. After the back panel is raised, the patient's state lying on the panel is not accurate.
People are not allowed to jump on the edge of the bed. People are not allowed to stand up while sitting on benches.
5. After the universal wheel is braked, it is not allowed to push or move, and can only be braked to prevent movement.
6. The horizontal direction is incorrect, and the telescopic guardrail is damaged.
7. Walking unevenly, damaging the universal wheels of the electric medical bed's crutches.
When using the controller, the control panel will wriggle and not move alone. If two or more electric medical beds are pressed simultaneously, the safe operation of childbirth can endanger the patient.
When the electric medical bed needs to be moved, the power plug must be unplugged and the power controller must be wrapped before it can be pushed.
When the electric medical bed needs to be moved, the maximum wear and tear of the playground should be increased, as patients may experience falls during the movement., Harmful to patient health.